• Non-volatile memory backup
  • Accuracy +/- 0.25% of span with 1 least significant digit
  • 4 password protected security levels
  • RS-485 serial communication
  • Loop break protection
  • Peak/Valley indication
  • 10 amp solid state relay output
  • Illuminated keypad
  • Intelligent self-tuning
  • Dual type J thermocouple inputs
  • NEMA 4X (IP66) rated front panel
  • UL and CE approved
  • Included joining bracket for U2 rack mount

The 132-DL series is a complete temperature control unit housed in a 1/32 DIN desktop instrument housing with a maximum load output rating of 10 amps. This controller offers the highest level of features in the most compact industry standard size. Power input to the control is provided via an IEC standard 120VAC inlet. Load power is supplied through a fuse protected, Deutsch 7-pin circular connector, and can be switched on and off from the front panel. Limit control is provided by a secondary input thermocouple, using software and a mechanically isolated relay.

This temperature controller comes with a single set point and dedicated alarm limit, percent output indication, and heater break detection. Process protection features include: open sensor protection, shorted sensor protection, input rate of change protection, and loop break protection.